Herringbone Invisible Lacquer Installation
& Matching Finish Planks
Project Description
Installation of new flooring in domestic property. The works is carried in two stages (level by level, starting from level 2), in order to allow for the client to move the furniture from one area to the other and back. Preparation work to include removing and disposinge of the existing laminate flooring. Priming of the plywood base with suitable primer in order to improve the bond with the new flooring. To supply and install engineered herringbone parquet, 15mm total thickness, size 90x450mm, “Herringbone Brenta”, Natural/Rustic Grade. The wood blocks to be laid in herringbone pattern from wall to wall, fully bonded onto the base, using flexible parquet adhesive. To supply and install engineered oak planks 15mm total thickness, 190mm wide, Rustic grade, “Oak Raw”. The flooring to be installed as a floated floor onto standard underlay. To remove and dispose of the existing skirting. To supply and fit square edge profile, MDF skirting, 144mm around the edges to cover the expansion gap. The skirting will require filling and painting by decorator after installation, not included in this quote. To undercut 5 doors door, door frames and architraves, in order to accommodate the new flooring. To supply and fit one matching finish solid oak reducer. To supply and fit two matching finish solid oak stair nosings.
Learn more about our Parquet Floor Fitting Service
Learn more about our Flooring Installation Service
Project Gallery
Quality Flooring Specialists

















