Engineered Herringbone Fitting
& Sound Proofing
Project Description
Preparation of the base throughout and installation of new herringbone parquet flooring in four bedrooms, walk in wardrobe, corridor, entrance hall, living room and front room. All strip out including removing and disposing of the existing floor covering, floorboards, skirting, building rubble, etc. completely exposing of the existing joists, to be carried out by separate contractor on site prior commencement of the flooring work. Preparation work to include levelling of the base using new treated 4×2 joists. To supply and fit Rockwhool thermal and sound insulation between the joists. Supply and installation of sound insulation boards Deckfon 26T, noise reduction up to 57dB. To full in the perimeter gap using acoustic expanding foam. To supply and install engineered herringbone parquet 15mm total thickness, 120x600mm, Rustic grade, “Herringbone Taro”. The wood blocks to be laid in herringbone pattern from wall to wall, fully bonded onto the base using flexible parquet adhesive. After the flooring work is complete, to supply and lay hardboard protection onto the flooring. To supply new softwood skirting, standard Victorian profile (TBC), approx. 215mm high. To install the skirting around the edges to cover the expansion gap. The skirting will require filling, priming and painting after installation is complete, not included in this quote.
Learn more about our Parquet Floor Fitting Service
Learn more about our Sub-Floor Preparation Service
Learn more about our Sound Proofing Service
Project Gallery
Quality Flooring Specialists





















