Custom Colour Engineerd Flooring
Supply & Installation
Project Description
Installation of engineered flooring in double reception room and corridor. Preparation work to include removing and disposing of approximately 4-6m2 of floorboards near the bay window. To replace the rotten joists at this area using new, 4×2 treated joists. Fixing down the lifted floorboards. Any damaged boards to be replaced with 18mm plywood. Screwing any loose floorboards through the area. Supply and fit 6mm plywood screwed down onto the existing floorboards, as a base of the new flooring. Removing and disposing of the remaining skirting. To supply engineered oak flooring 15mm total thickness, 190mm wide, Rustic grade, brushed, Custom/Bespoke Oil finish. To supply flexible parquet adhesive for the works. Installation of the engineered planks, fully bonded onto the base, using flexible parquet adhesive. Supply and fit new pine unfinished skirting, standard Victorian style profile around the edges to cover the expansion gap. The skirting will require filling and painting after installation, not included in this quote. Undercutting the fitted unit under the stairs in order to accommodate the new flooring. Supply and fit matching finish flat strip 23mm, around the fireplace and fitted cupboards. To supply and fit matching finish ramp reducer, at the kitchen door.
Learn more about our Flooring Installation Service
Project Gallery
Quality Flooring Specialists



















